Tuesday, April 5, 2022
HomeHow toHow to paint a room?

How to paint a room?

If you are bored of the old patchy walls of your room, then it is the right time to remodel your space. A refreshing and good color of paint and a little decor can completely change the look of your room. In the following article, we get to know about How to paint a room? So please don’t skip the article from anywhere and read it carefully because it will be very useful for all of you guys.

It is the least expensive way to transform an old space into a new and fresh room. Learning to paint properly is not rocket science. You need to know some basic tips and tricks, and you are good to go to paint a room by yourself. Are you still confused about how to paint a room? Don’t worry! Here is the complete and brief guide that will help you paint your room without any helper. So, are you ready for the change? 

Following is a brief step-by-step guide, so keep reading this until the end.

How to paint a room

Step 1: Make a Plan to paint a room

Before starting a task or anything plan is the most crucial factor for success. And when you are going to makeover your room or just going to paint your room following are the most important thing that you must need consider while you are making a plan;

  • Make a sketch that you want. 
  • Decide the color of paint ( specifically according to the anterior of your room)
  • Consider your budget( One of the most important things that you must need to consider before starting anything)
  • Follow the general ruler of buying paint – One Gallon will cover about 400 square feet. 
  • Take the measurements of the walls of your room so you can buy paint accordingly.
  • How much time do you have?
  • A painting technique that you are going to use

Step 2: Necessary Tools and Materials to paint a room

Tools and materials may vary depending on the quality and instruction of paint chosen for your room makeover. But few common tools and materials are following:

  • Paint
  • Paint roller
  • Paint roller extension pole
  • Drop cloths
  • Paintbrushes
  • Paint tray
  • Sandpaper
  • Painter’s tape
  • Rags
  • Putty knife

Step 3: Preparing the Walls to paint a room

The first and the foremost step while painting a room is the prep of the room’s walls. Preparing the walls is an important and key factor in getting maximum and good finishing of paint on walls. Before preparing the walls, make sure you have cleared the room, gathered the room furniture in the center of the room, and covered it with a plastic cover. Tape the switchboards and turn off the electric supply.

So, when the room is ready, start with stripping the old wallpaper or painting with the help of sandpaper or other removal tools. Also, scrape off the flaking paint from the wall. Remove all the loose stuff and make the appearance of the wall as much smooth as you can. Fill the dings using spackle or with wood filler, if any, to get a smooth finish of the wall. Let them dry and smooth with sandpaper and prime them.

Step 4: Paint the Walls of Room

Now after all the preparations are done now, it’s time to paint the walls. The general rule of paint is to work from top to bottom, which is an excellent way to get maximum finishing in your work. So, First of all start from painting the ceiling of your room then move to the walls and finish with the trim. Painting the top is similar to the painting of walls just make sure do not over brush or roll.

Also, do not brush or roll too fast because it would not let sit the paint on the base properly. Usually the ceiling color is different then the walls so to get proper finishing once the ceiling is dry mask is off with painter’s tape and ten start doing the walls. Always dip the brush about third of the way in paint and tap a little bit with bucket to remove the excess paint and to prevent run. Then apply on the walls smoothly with gentle strokes.

Conclusion

If you are using a roller then you will definitely need a roller grid, put it in the paint bucket. Then take a roller and bamp it with the help of a wet rug. Before using it, Dip the roller a little bit, then roll it 4 to 6 times on the roller grid to even out the paint on the roller for good application. Then gently start applying paint on the wall with slow to medium movements to avoid splatter and do not press or squeez the roller just reload when its needed. That’s it after painting. Clean your tools as soon as possible with paint remover.

Also read: How to convert PDF to PowerPoint online.

RELATED ARTICLES

How to thread a needle?

How to get Motivated?

How to detox your liver?

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Most Popular

0.5 as a Fraction

.43 as a Fraction

.375 as a Fraction

5.5 as a Fraction

Recent Comments